Comments on: Necron Lord Conversion

By: tct123

tct123 — Sun, 31 Aug 2008 10:44:07 +0000

i have beter way than him

1.get some 2mm brass rod and pin it to torso

2.slide a length of 3.2mm (about the same as the brass rod)of styrene tub over the brass rod and glue the top of it to the torso.

3.Shape your curves. Carefully bend the tail section into the shape you want and then cut it off at the length you want.

4.slide segments of 4mm styrene tube over the tail at small interviles then glue. if any catch just file it down.

5.assemble the rest as normal and for the end of the tail use the end of a gauss flayer.

By: daniel parkinson

daniel parkinson — Sun, 08 Jun 2008 16:32:43 +0000

That Is awesome i collect tau and that thing inspired me to make my tau commander like that! and i was going to try and get necrons as their allies because it inspired me so much

By: Fireman Tim

Fireman Tim — Fri, 06 Jun 2008 11:21:37 +0000

Nice work Mike.

By: Mike the Necron Guy

Mike the Necron Guy — Thu, 05 Jun 2008 16:35:15 +0000

I’m looking forward to testing this unit in combat soon. He’s pretty expensive on the board, but should make an excellent Tank Killer.

For gameplay purposes, I’m still considering him a Destroyer Lord, giving him +1 Toughness and Jetbike movement. To make him more Wraith-like, I’m also giving him the Phase Shifter from the Wargear, giving him a 4+ Invuln save. And of course, he’s keeping his Resurrection Orb.

On top of that, I’ve upgraded his Staff of Light to a Warscythe, since he’ll be travelling with a flight of Wraiths and will be in CC most of the time anyhow. No saving throws? 2D6+ Strength vs Vehicles? Heck yea!

In total, he’ll be a 210 point unit - nearly the cost of a Monolith. Only time will tell if he’s worth his points

By: mads

mads — Thu, 05 Jun 2008 13:28:27 +0000

wow its awesome!

my brothers is alredy working on one of them the sec he saw the video xD