Step 6 Prime the structure

Simply base the building in acrylic black paint. I’d suggest even painting underneath the floors just in case you want to take photos in the future.

Warhammer 001.jpgWarhammer 012.jpg

Step 7 Create Rooftop base

Cut a base to fit the top with appropriate side walls. Glue the walls to the base.

Warhammer 014.jpgWarhammer 015.jpg

Step 8 Glue decorative pieces to base

This step gives variety to the base. I used the windows from the walls I cut out earlier. Glue them appropriately to the base in any fashion you choose. Then let it sit to dry.
Warhammer 016.jpgWarhammer 019.jpg

Step 9 Paint rooftop base

Simply paint the base in acrylic black. Make sure it’s sturdy before you begin painting.

Warhammer 047.jpg

Step 10 Create upper tower walls

These walls will be used for the bell area. I made the windows large in ratio to the walls so that you can clearly see the bell. You can damage them a little too if you so choose. I like doing it for variety. Nothing is as boring as perfectly in tact buildings, right?

Warhammer 046.jpg

Warhammer 40k bell tower project part 3 coming soon…